JoeTap Nitro Cold Brew Coffee Tap System High-Capacity JT-HC-1-2

Description

JoeTap Nitro Cold Brew Coffee Tap System High-Capacity JT-HC-1-2
JoeTap Nitro Cold Brew Coffee Tap System High-Capacity JT-HC-1-2
JoeTap Nitro Cold Brew Coffee Tap System High-Capacity JT-HC-1-2
New. Never used. There are some minor scuffs to the top of the unit. The front still has the plastic on the outer surfaces.
Each JoeTap™ dispenser is shipped as a complete system. It requires only cold brew coffee, electricity and a supply of nitrogen gas (N2). NOTE: You will need a wrench to tighten the nut on the gas supply and a flathead screwdriver to adjust the pressure on the regulator. The cold brew coffee should be filtered down to 5 microns or less and chilled between 34 to 38 degrees F. To chill the cold brew, place it in the 5 gallon stainless beverage tank (provided with your unit), then place the tank inside the operating JoeTap™ dispenser. Alternatively, you may pre-make and pre-chill the cold brew in a separate container in a refrigerator or cold storage walk-in. The JoeTap does not include a gas source. You will need to obtain nitrogen (N2) from a vendor who supplies beverage-grade compressed gas. A metallic off-taste or other undesirable flavors may develop from poor quality gas! You may also get your nitrogen from a nitrogen generator such as the Nitrogenator™ Elite available from AC Beverage.
What is Included:
When you unpack your JoeTap™, you should have the following components: • JoeTap High Capacity Unit. Each unit is a stand alone, self contained, refrigerated unit with patent pending JoeTap technology:
Single Door Refrigeration Unit:  • JT-HC-1-2: JoeTap dual faucet, single tower system (1 nitro/1 standard faucet)
• Two 5 gallon beverage tanks. These tanks have lids that are released and secured with handles. The lids have rubber gaskets which allow for a proper seal when filled with cold brew coffee and gas. These tanks are also equipped with safety release rings that must be used anytime you are opening a tank that has been charged with gas.
• 25 JoeTap cleaning solution packets. You cannot use ANY other cleaning product and should not use any other cleaning product to clean the JoeTap and/or beverage tanks. The product inside the packets is hazardous if not handled properly. Please read cleaning instruction thoroughly before opening or handling. For additional cleaning packets, contact JoeTap.
• Gas regulator. The gas regulator included ONLY works with nitrogen (N2) gas tanks. You will need a wrench to tighten the nut when attaching to N2 tank and a flat head screwdriver to adjust the pressure on the regulator.
• Additional items include: Drip tray for each faucet and food grade lubricant (for lubricating O-rings weekly).
Exterior Dimensions: 36"L x 24.75"D x 34.56"H without casters
Weight:320lbs
Terms & Conditions
Payment & Returns
Shipping
- no title specified
The unit
MUST
be installed by personnel who are qualified to work with plumbing, electricity and/or gas/LP.
Improper installation can cause serious injury to person and/or equipment. The unit MUST be installed in accordance with all applicable codes. Block20sales will
NOT
be held responsible for any damages to the item due to improper installation.
Block20sales will also
NOT
be held responsible for
ANY
type of refund due to damages incurred due to improper installation.
Terms and Conditions
Buyer is welcome to inspect equipment, prior to purchase.
Package discounts on multi-item purchases.
If you don't see what you are looking for call us and we will try to locate it.
We offer business liquidation services.
Warehouse Outlet -
Free Local Pick Up
Open To The Public for Equipment Inspection
Monday - Friday 8 - 5 pm or by Appointment
Customer Satisfaction
As a small business, we really do appreciate your purchase! If you are not completely satisfied; please give us a call and the opportunity to make things right.
We can be reached by phone at
605-987-SOLD (7653)
.
Inspection
Buyers are welcome to come and inspect any item prior to purchase.
Equipment Inspection
Used equipment is just that, it is an assembly of aging components that has been cleaned, inspected, perhaps painted, and had required repairs performed to make the piece of equipment functional and reasonably attractive. All items are sold as pictured, if you do not see it in the pictures do not assume that it is included. Each piece has been cleaned for cosmetic appearance, further cleaning may need to been done before installation.
Warranties
All sales are sold "As-Is." If you call us to discuss an issue we may be able to help remedy the problem.
- no title specified
Payment
Payment is expected immediately (or within 72 hours if purchased via auction) unless other arrangements are made between buyer and Block20sales prior to placing bids or offers.
Block20Sales accepts payments via PayPal, all major credit cards, and cash. Payments can also be made by mail with a check; there will be a minimum of 5 business days waiting period for clearing on all checks.
Items will only be shipped upon confirmation of funds.
Local pickup is also available. If an item is listed as an auction, Block20Sales reserves the right to end an auction early in the event of a local sale.
You
MUST
provide us with
ALL
of the following:
1.
Complete shipping address including business name.
2.
A contact person and phone number for delivery.
3.
You must specify if address is commercial or residential.
4.
Most equipment is shipped on a pallet. We need to know if you need a lift gate for delivery or if you have a dock or way of unloading.
We ship within 1-3 business days of confirmed funds unless otherwise noted.
Freight shipping to continental 48 States
Warranties
All sales are sold "As-Is." If you call us to discuss an issue we may be able to help remedy the problem.
Returns & Refunds
If you are not happy with your purchase and we are unable to make things right, then we will accept a return under specific conditions. If returns are necessary, buyer will be required to pay all return shipping fees and a 20% restocking fee on returns other than Item not as Described.
The buyer can refuse to accept the shipment, if they believe item is "NOT AS DESCRIBED" or damaged in shipping.
We cannot accept returns, after the item is accepted, taken off the pallet or installed.
Buyer is responsible for item and shipping costs during the return process.
Please contact us for return authorization.
Refunds will be issued once the item is received back, in the same condition, with no damages incurred while the buyer has possession, to include accidents or improper installation.
- no title specified
Freight Shipping: Inspection & Damages
Every freight shipment is insured. But in order to collect the insurance on damaged goods the receiver Legally, when Block20Sales signs the shipment over to the freight company, the freight company owns it. When you receive the item and sign for it, you own it. Therefore it is imperative that you carefully inspect your shipment for any damage. We specifically include a large shipping sticker that asks the buyer to examine the freight before accepting it.
You
MUST
inspect the shipments
BEFORE
signing for it!
If there is any damage at all you must note the damage on the freight bill. This is the only way you will be compensated for the damage.
If there is damage, you have two options:
1. You can note damage on the freight bill and accept the item anyway
2. You can refuse the shipment.
99% of freight damage is cosmetic. If you sign the freight bill damaged then the freight company may replace your item, approve reimbursement for parts and repair, or provide compensation depending on the damage to your item. This is often the best option if you need to get your item operational and the damage is cosmetic. If you refuse the shipment it will be returned to us. This is usually the best option if your shipment is damaged beyond repair. If you accept your shipment in a damaged state it is very important that you call the freight company immediately to schedule an inspection and file the freight claim, you should take good pictures from different angles of the item and the packaging, and you should save all packaging material.
Freight companies are able to deny millions of dollars in damages because items were not inspected at the time of delivery and were not marked as "Damaged" on the bill of lading. If your item has been crated, please expect to uncrate it and inspect it before the driver has left and before you sign for it.
For freight deliveries: A driver is obligated to wait. If he or she tries to rush you or you are in any way unhappy with the delivery, ask to speak to his or her dispatcher.