-40%

Mazzella Mechanical Splice Wire Rope Sling Eye-and-Eye 6 x 25 IWRC 12' Length...

$ 90.24

Availability: 100 in stock
  • Condition: New
  • Return shipping will be paid by: Seller
  • Item must be returned within: 30 Days
  • Model: Does not apply
  • Brand: Mazzella Lifting Technologies
  • All returns accepted: Returns Accepted
  • Size: 12' Length, 7/8" Diameter, 14" Eyes
  • MPN: Does not apply
  • Refund will be given as: Money Back

    Description

    Mazzella Mechanical Splice Wire Rope Sling, Eye-and-Eye, 6 x 25 IWRC, 12' Length, 7/8" Diameter, 14" Eyes, 15200 lbs Vertical Load Capacity
    Wire rope sling for lifting loads in industrial environments
    6 x 25 IWRC (independent wire rope core) construction for a balance between abrasion resistance and fatigue resistance
    Eye-and-eye endings for vertical, choker, and basket lifting configurations
    Mechanical (also called Flemish) splice is stronger than a hand splice
    Meets ASME specification B30.9 and OSHA specification 1910.184
    The Mazzella 6 x25 IWRC (independent wire rope core) single-leg wire rope sling has eye-and-eye endings and a mechanical splice for lifting loads with vertical, choker, or basket configurations in industrial applications. The 6 x 25 IWRC construction contains six strands of wire rope with 25 wires per strand wrapped around a separate 7 X 7 wire rope, which has seven strands with seven wires per strand, in the center of the sling. This construction provides a balance between abrasion resistance and fatigue resistance, or resistance to the weakening that results from too much bending. The wire rope construction is flexible and has more abrasion and heat resistance than a web sling. This eye-and-eye sling has an eye, or loop, on both ends, and can be used with vertical, choker, and basket lifting configurations. The eyes are secured with a mechanical (also called Flemish) splice that is stronger than a hand splice. This sling has a minimum D/d ratio of 25 and meets American Society of Mechanical Engineers (ASME) specification B30.9 and Occupational Safety and Health Administration (OSHA) specification 1910.184. Slings are used to lift heavy objects for industrial applications. Types of slings include web slings, wire rope slings, chain slings, and mesh slings. The appropriate type of sling for an application depends on the strength-to-weight ratio, flexibility and resistance to bending, resistance to abrasion and cutting, resistance to crushing, resistance to stretching, and resistance to high temperatures and other environmental stressors. Slings have one, two, three, or four legs; or a continuous loop of webbing or wire rope. Legs are support branches that extend from a single point at the top of the sling to the item being lifted so the weight of the load is distributed evenly among the branches. Slings have eyes (loops) or alloy steel fittings on the ends. A vertical lifting configuration connects a crane hook directly to a load with a single, vertical sling, usually by means of a hook. In a choker configuration, the sling wraps entirely around the load, and one loop passes through the other to form a slip noose, or choker. In a basket configuration, the sling passes under the load and both ends of the sling connect to the crane hook. Load capacity is the maximum weight to be lifted in a vertical configuration. The capacity in a choker configuration is approximately equal to the vertical capacity times 0.8. The capacity in a basket configuration, with sling ends at a 90-degree angle, is approximately equal to twice the vertical capacity. Load capacity in a basket configuration decreases if the angle of the sling is less than 90 degrees. For example, a sling with a capacity of 2,000 lb. in a vertical configuration will have an approximate capacity of (2,000)(0.8)=1,600 lb. in a choker configuration and an approximate capacity of (2,000)(2)=4,000 lb. in a basket configuration, if the sling ends are at a 90-degree angle to the load. A wire rope sling's capacity in a basket configuration applies only when the configuration meets the sling's minimum D/d ratio, which is the ratio of the diameter of the rope's curve around the load (D) to the diameter of the sling (d). If the minimum D/d ratio is not met, the capacity of the sling is decreased. Mazzella Lifting Technologies manufactures lifting solutions including slings, cranes, and hoists. Founded in 1954, the company is headquartered in Cleveland, OH.
    Shipping
    We offer FREE shipping on all orders!
    We ship within Three business days of payment, usually sooner.
    We use a selection of shipping services such as UPS, FedEx, USPS etc.
    We only ship to the lower 48 states, no APO/FPO addresses or PO Boxes allowed.
    Local pickups and combined shipping options are not provided at this time.
    Return
    You can return a product for up to 30 days from the date you purchased it.
    Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
    Payment
    We accept payment by any of the following methods:
    PayPal
    Please pay as soon as possible after winning an auction, as that will allow us to post your item to you sooner!
    Feedback
    Customer satisfaction is very important to us.
    If you have any problem with your order, please contact us and we will do our best to make you satisfied.
    Contact Us
    If you have any queries, please contact us via ebay. We usually respond within 24 hours on weekdays.
    Please visit our eBay store to check out other items for sale!
    Thank you for shopping at our store.